Toronto, ON, Canada
info@Enerfreeze.ca
Branded in U.S.A as
EnerFreeze for HVAC: Energy savings solutions HVAC, Chillers, and refrigeration
EnerFreeze for Hydraulics: Reduces heat and optimizes performance while saving fuel and increases life expectancy
WHAT MAKES EnerFreeze™ RTO FORMULATION TECHNOLOGY DIFFERENT FROM OTHER PRODUCTS IN THE MARKET THAT MAKE SIMILAR CLAIMS?
All other market place competitors are Stage 1 products that reverse oil fouling in the system in the short term. EnerFreeze™ comprises advanced patent pending formulations which, after the initial introduction takes place, permanently imbeds in the pores of the metal and fuses; bonding to the friction-bearing parts of the compressor and inner walls of the thermal transfer tubing carrying the refrigerant and compressor oil. The fused molecules are now in an inert state in which nothing can chemically react or stick to the new surface. Oil fouling at this point is no longer possible. As the oil molecules attempt to re-establish their adhesion, they are smoothly channeled back into the system. EnerFreeze™ formulations are the only product line which permanently prevents the re-introduction of oil fouling which impedes HVAC system operation and makes what compressors work harder causing higher kilowatt usage.
IS EnerFreeze™ an OIL Additive OR A PROA?
No. It is not a temporary solution or additive. EnerFreeze™ is like no other. A 100% active ingredient molecular compound formulation that works in synergy with your refrigerant and compressor oil to restore the optimal heat transfer of your system without adulterating waxes or toxic chlorine or acid derivatives.
How EnerFreeze™ APPROACHES OIL FOULING AS COMPARED TO OTHERS?
Contenders approach to thwart oil fouling for the short-term utilizes toxic and corrosive cleaning agents. Over time, the oil fouling returns and then starts to again impede the refrigerant flow and the rate of heat transfer. EnerFreeze™ approach to oil fouling is quite different. The patent pending formulation provides for permanent fusing to parts with life-of-system service in all refrigerant environments. (Only Ammonia/Ammonia Glycol is currently excluded, testing is still underway)
WHY IS MY LOCAL AIR CONDITIONING COMPANY IS UNFAMILIAR WITH EnerFreeze™?
Although there have been many attempts over the years to engineer energy effective additives, only recently has the true “Stage 2” Refrigeration Optimizing Treatment formulation of EnerFreeze™ been developed, successfully tested and made available to the commercial HVAC engineering trade. Having extensive geographical/climatic opportunities, initial beta tests were conducted in the warmer latitudes of the South/Southeastern U.S. It has been proven to be safe and effective through laboratory compatibility testing.
HAS EnerFreeze™ BEEN TESTED IN THE PROFESSIONAL HVAC ARENA?
Yes. EnerFreeze™ formulations have been tested by one of the preeminent HVAC laboratories in existence, Edison Testing Lab/Intertek. There were two separate tests:
EnerFreeze™ underwent a compatibility test, which tested and proved that EnerFreeze™ does “no harm” to any of the parts of the HVAC system, whether they be compressor parts, copper tubes or in the air handler side.
EnerFreeze™ was tested in a sterile, isolated lab setting in which two brand new compressors were tracked, side by side. “Before” baseline measurements were taken and tracked in both compressors. After EnerFreeze-2000 was injected into the “test” compressor for a period of 48-hours, the “After” computer measurements were compared between the treated compressors for a period of 48-hours. Virtually all results showed positive reactions in the EnerFreeze™ treated compressor. (and you must remember that EnerFreeze™ can take 1-3 weeks to fully integrate.